Do you use the Craftsman lawnmower? Does it keep your grass well-trimmed and level? If the answer to the second question is NO, then you might have used the wrong height settings.
You can get these settings from any source. But if you are looking for the ideal settings, you will have to get these values from a reliable guide.
In this post, you will learn how to adjust the height of your Craftsman lawnmower. Besides, we will also show you several ways by which you can get the best results with your lawnmower.
Craftsman Lawnmower Height Setting Guide
Here are the settings for tuning the Craftsman lawnmower. But before using our guide, we suggest that you consult the operator’s manual that came with your unit.
What is the Height Setting on a Craftsman Lawn Mower?
The height setting on the Craftsman lawnmower allows you to adjust the deck until you have the correct cutting height. On most Craftsman lawnmowers, you get 6 height settings that range between 1.50 – 3.50 inches. If you want to use these values, you will need the wheel adjustment lever.
With some Craftsman Riding lawnmowers, you can expect height settings ranging from 1 – 4 inches. But unlike the walk-behind models, the riding mowers use a single adjustment lever.
How to Adjust the Cutting Height on Craftsman Lawn Mower?
You can adjust the cutting height of the Craftsman lawn mower by using the following steps:
- Head to the wheel of the mover
- Look for the wheel adjuster lever
- Move the lever forward to increase the height of the mower
- Move the lever backward to reduce the cutting height of the lower
- Repeat the above steps on all wheels ( if they have adjusters)
How to Adjust Cutting Height on Craftsman Riding Lawn Mower?
If you want to change the cutting height of the Craftsman Riding Lawn Mower:
- Go to the Attachment Lift Lever on the side of the mower.
- Move the lever to your preferred setting
How High Should a Lawn Mower Be for the First Cut?
If you want to cut your lawn for the first time, make sure the mower is set to 3 inches. By using this setting, you can cut the grass without worrying about scalping.
Craftsman Lawn Mower Height Adjustment Lever
The Craftsman Lawnmower height adjustment lever can be used to change the deck height of the mower. On most models, the device can be found on the wheel of the lawn mower.
Why is My Mower Cutting Unevenly?
Now here are some reasons why your mower might be cutting grass unevenly:
- Wrong Tire Pressure
If the tires on the mower have the wrong pressure, then the deck becomes unbalanced. As a result, the unit will not cut the grass properly.
- Bad Mower Blades
With worn-out or dull blades, the lawn mower will have a hard time leveling your grass. After all, such blades cannot provide the right amount of suction for the perfect cut.
- Unbalanced Blades
Even if the blades are in premium condition, using them in an unbalanced position can result in poor trimming. With this in mind, it is advised that you set up the mower correctly.
- Wrong Speed
If your mower moves too fast or slow, it will not cut the grass correctly. For the desired results, you should maintain a speed of 4 miles per hour as you move across the lawn.
- Bad Pulley
Aside from moving slowly, a bad pulley can reduce the speed of the belt thereby resulting in terrible trims. If you are not sure if the pulleys are bad, check their surface for a glazed look.
When Should I Lower My Lawn Mower Blade?
Before reducing the height of your lawn mower blade, you should consider the type of grass as well as the mowing season. For instance, if you are cutting creeping bentgrass, the blade will have to become lower than usual.
Now how about if you are thinking about the mowing season? Well, you should reduce the cutting height of the blade during spring. After all, this setting allows the mower to cut the grass until it gets the right amount of sunlight.
How Do I Know If My Grass Is Too Short?
You can determine if your grass is too short by looking at its stem. If you notice any brown stems, then the grass has been cut lower than required.
Is 5 inches too High for Grass?
Yes, 5 inches of grass can be too high for mowing. For the best results, it is advised that you cut the grass as soon as it reaches a maximum of 3 inches.
Should Mower Deck Wheels Touch the Ground?
Yes, the wheels of your lawn mower should touch the ground. To avoid lawn scalping, allow the tires to stay at least ⅛ of an inch from the ground.
