Kitchenaid Fridge Temperature Settings Guide

On every Kitchenaid Fridge, there are settings for adjusting its coolness. When used properly, these option allows the fridge to offer the ideal temperature for keeping items cold, fresh, and safe from bacteria. 

If you have the right idea of the parameters to use, you can set your Kitchenaid properly and preserve food for longer periods. Besides, you should enjoy greater energy savings even with regular use.

kitchenaid refrigerator temperature settings

Kitchenaid Fridge Temperature Settings Guide 

In this post, we will be listing various ways how you control the temperature of your Kitchenaid fridge. Although this guide is well-researched, we advise that you use it only for reference purposes. Now let’s get started.

Kitchenaid Refrigerator Adjust Temperature

Here are the steps needed to adjust the temperature on the Kitchenaid fridge 

  • Head to the Control Panel of the fridge 
  • Press the + or – buttons on both sides of the displayed temperature  to change the setting
  • Leave the refrigerator setting at 37°F

The ideal temperature for a Kitchenaid Fridge should stay at 37°C. At this temperature, food can be preserved without covering it in frost or ice. 

What Temperature Should a Kitchenaid Refrigerator Freezer Be Set at?

If you want to adjust the freezer compartment of a Kitchenaid fridge, allow the temperature of the former to stay at 0°F. With this setting, you can avoid freeze-burn and stop the growth of bacteria.

How Do I Reset My Kitchenaid Refrigerator?

According to experts, a quick reset might be the tool needed to improve the temperature settings of the Kitchenaid fridge. If you would like to use this idea, use the following steps:

  • Head to the plugged-in Kitchenaid fridge
  • Remove the plug of the fridge from the wall outlet 
  • Keep the fridge unplugged for 5 – 10 minutes

How Do You Reset the Thermostat on a Kitchenaid Refrigerator?

If you want to adjust the thermostat on the Kitchenaid Refrigerator:

  • Unplug the Kitchenaid refrigerator from the wall outlet 
  • Keep the fridge unplugged for 10 minutes
  • Plug back the fridge into the wall socket to power the unit 
  • Wait for a few minutes for the temperature of the fridge to even out

Why is My Kitchenaid Fridge and Freezer Not Cold?

Here are some possible reasons why your Kitchenaid Fridge and Freezer might not be cold:

  1. The Fridge is Off

If your Kitchenaid fridge is turned off, it will feel warm. So before looking for other reasons why your freezer or fridge compartment isn’t cold, make sure the fridge is well plugged in. Then allow some hours to pass for its temperature to stabilize.

  1. Dirty Condenser Coils

If the condenser coils are covered in dust, they cannot perform efficiently. As a result, the fridge loses its cooling power to become warmer.

  1. Bad Door Gasket 

If the door gasket seal is broken or dirty, the door of the fridge stays open for most parts of the day. As long as the door isn’t shut, you will have a steady build-up of warm air that will stop the fridge from cooling.

  1. Faulty Parts

Parts such as an evaporator fan, thermostat, and start capacitor are essential for the coolness of your fridge. As soon as they become defective, the Kitchenaid fridge does not have the right amount of coolness to keep stored items.

  1. Overstuffed Compartments

If you store too many items in your fridge, the air vents might get blocked. Without the proper circulation of air, the fridge becomes warmer than expected.

What is the Defrost Cycle on a Kitchenaid Freezer?

The defrost cycle helps the Kitchenaid fridge remove any ice buildup. To activate this system, 

  • Open the Kitchenaid Refrigerator 
  • Hold down the button of the door alarm and the Temperature Down button
  • Release your finger from the alarm button while holding down the Temperature Down button 
  • Continue holding the Temperature Down button until the display shows “Fd”
  • Hold down the Temperature Down button ( for the second time) until you notice “SH” on the screen
  • Hold Down the Temperature Down button ( for the third time) until the “Fd” and “SH” message flashes on the screen.

How Do I Know If My Refrigerator Is Cooling?

One of the easiest ways of checking if your fridge is cooling involves using a fridge thermometer. Since the item is accurate and easy to use, you can quickly determine if your appliance stays at the recommended temperature setting.

What Damaged My Fridge Compressor?

Here are some reasons why the fridge compressor might become damaged:

  1. Dirty Condenser Coils

If your condenser coils become dirty, they tend to send the refrigerant back to the compressor. As the issue gets unchecked, the latter becomes defective. 

  1. Excess or Little  Refrigerant 

An ideal amount of refrigerant can help keep the compressor in working order. But if you have excess too little or excess fluid, the compressor might have technical issues.

  1. Pollutants

Oil, dirt, moisture, or even air should not get into the compressor. If these items move into the device, they mix with the refrigerant and make it faulty.