Milwaukee Drill Torque Settings Chart and Guide

In your hands, the Milwaukee drill can be a great device for most drilling tasks. Asides from boasting of balanced feel, the drill has the ideal features for boring into various materials. But before you can get the expected results, it would help if you spent some moments adjusting its settings.

One such setting involves the torque of the drill. With the right guide, you should be able to get these settings without any fuss. By going through this article, you can get several adjustments for using the Milwaukee drill torque.

Milwaukee Drill Torque Settings Chart and Guide

Here is a chart showing the various torque settings for the Milwaukee M18 ½ Compact brushless drill. Although this article is well-researched, it would help if you used this article as a guide for setting up the Milwaukee drill.

If you are using the torque setting on the Milwaukee drill, you will have to consider the task at hand. For instance, if your project involves pushing small screws through softwood, then you should set the clutch to 1 – 3. But if you are working with small screws with hardwood or medium screws with softwood, then you can set the clutch to 4 – 6.

What are the 1 and 2 Settings on a Drill?

On the Milwaukee drill, the 1 and 2 settings are used to control its speed. For example, if you pick the No 1 setting, you will get a low speed while the No 2 setting gives a high speed. 

Can You Set Torque on Milwaukee?

Yes, you can set the torque on the Milwaukee drill. To perform this task, twist the torque selector collar until you reach the desired torque setting.

What are the Torque Settings on My Drill?

On the Milwaukee drill, you have various settings for adjusting its torque. For instance, if you rotate the collar to 1 – 3, then it will be able to drill small screws into soft wood while settings 4 – 6 work better with the same screws but harder wood. However, changing the setting to higher values allows the other screw sizes to penetrate the softwood and hardwood. 

How to Use Milwaukee Drill M18

Here are the general steps for using the Milwaukee M18 Drill

• Rotate the collar with anticlockwise movements to open the chuck
• Insert your preferred drill bit into the drill
• Tighten the drill bit by rotating the collar with clockwise movements
• Choose your preferred speed setting by flicking the speed to 1 ( slow) or 2 ( fast) 
• Set the torque selector to the Drill Bit symbol for drill mode, 
• Rotate the torque selection collar from the drill symbol to any of the dials with numbers to choose the torque setting
• Rotate the torque selector collar to the Hammer drill for using masonry bits
• Flick the control switch ( with an arrow) near the handle for forward movements 
• Flick the second control switch ( on the opposite side of the other control switch)  for backward movements 

Milwaukee Drill: How to Change Bit

• Unscrew the black part of the chuck to loosen the drill bit
• Pull out the current inserted drill bit from the chuck
• Insert a new drill bit into the chuck
• Screw the black part of the chuck to tighten the drill bit 
• Tighten the black part of the chuck until you hear a click

Which Milwaukee Drill Has the Most Torque?

According to reviews, the Milwaukee M18 Drill boasts the most torque in the market. After all, this device promises up to 1200 in-lbs of torque with 2000 RPM. 

Should I Drill Concrete Fast or Slow?

If you are drilling concrete, ensure the speed stays slow or medium. Then pull out the drill from the material periodically to remove any dust from the drilled hole.

Should I Wet the Concrete Before Drilling?

Yes, you can wet concrete especially before drilling the material. After all, this hack helps reduce any drilling dust that might affect you and the drill bit. 

How Do I Choose the Right Drill Bit?

There are several ways by which you can choose the right drill for your project. For instance, you can start by considering the size of your preferred hole or even the type of material drilled. Besides, you can also choose the type of bit based on compatibility with your drill.